Smart Automatic Garden Water Timers Intelligent Automatic Watering Machine Timing Drip Irrigation System Kit

Product Name: Smart Automatic Garden Water Timers
Product Model: QN-X20
Color: White, Green
Mode: Drip/Adjustable
Material: ABS
Battery: Built-in rechargeable battery 3.7V 2000mAh
Power: 4W
Waterproof: IPX4
Charging: Type-C
Automatic drip irrigation: supports up to 20
Applicable Scenarios: Home, office, etc.
Usage: Watering Control/Eco Friendly Irrigation

Functions
1. Built-in rechargeable battery 3.7V, power is 4W, capacity is 2000MAH, standby 1-2 years.
2. 1 hour-30 days watering interval can be set, watering time for 1-300 seconds.
3. You can use it as a clock and check the battery balance.
4. Use external water container, no need to connect the power supply and faucet.
5. Low voltage and water shortage alert function.
6. Charging time is 3- 5 hours, full charge time depends on the watering frequency and times, if once a day, each time 15-30 seconds can be used for 2-3 months.
7. The working temperature is 3-50 degrees Celsius. Tips: This product can not be immersed in water.

Setup Steps
1. The first time you use it, turn the upper knob to any position except OFF to wake up the waterer.
2. Clock setting: Turn the knob clockwise to SETCLOCK, adjust the clock direction to the current time with the small knob below, and press the small knob briefly to make sure.
3. Appointment Watering Setting: Turn the knob clockwise to STARTTIME, with the small knob to set the appointment watering time, short press the small knob to confirm.
4. Days Between Watering Setting: Turn the knob clockwise to HOW OFTEN(D) and press the knob to set the days between watering.
5. Hourly Watering Interval Setting: Turn the knob clockwise to HOW OFTEN (H) and set the hourly interval with the small knob, press the small knob briefly to determine.
Special Note: The days and hours cannot be set at the same time, if you set the days and hours, it must be “0” or vice versa!
6. Watering time setting: clockwise knob to HOW LONG, with the small knob to set the watering time short press the small knob to determine. 7. Manual watering setting: manual watering time setting: clockwise knob to HOW LONG, with the small knob to set the watering time short press the small knob to determine.
8. Manual Watering Setting: Press and hold the knob, then press the knob to stop.
9. Battery balance view: non-setting state rotate the small knob can be.
10. Shutdown: It can be adjusted to OFF. The machine has a memory function, and shutdown does not affect the original settings and use.
11. Set up after the completion of a water, which is to verify that the settings of the performance of the success of the display after the shutdown into the energy-saving hibernation, the operation of any key to wake up again.
12. External TYPE-type watering set: long press the small knob can be, and then press the stop.
13. External TYPE-C charging, charging screen display: “ON”, full power screen display: OFF”, can work with electricity, but charging all the function keys will stop setting function.
14. Water shortage: To determine the alarm prompt function, a prompt sound will be made when there is insufficient water and electricity.
15. All have to do dustproof and waterproof treatment, can prevent slight spraying water (can not be immersed in water).
16. anti-siphon function, so that the container placement is not limited.