Cloning Remote Control 433MHz Wireless Duplicator for Garage Doors Gates Alarms 50-150m Range Compatible with Most Common Chips Easy Copy 12V/27A Car Key Fob

Product Name: Remote control
Material: plastic.
Color: as shown in the picture.
Type: wireless remote control.
Rated voltage: 12V 27A battery (included).
Wireless transmission distance: 50-150 (m), (open field).
Clone chip type: 2260 (PT2260, SC2260, LX2260, HX2260) 2262, (PT2262, SC2262, LX2262, HS2262, HX2262), PT2264, PT2240 (LX2240), 1527 (EV1527, HS1527, HX1527) FP527, CS521AX5, 5SMC2607, 5SMC3261 HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F629, PIC16F630, etc., the prefix of the different chip manufacturers chip model is not the same, as long as the chip As long as the chip has the same digital part, it will be the same model.
Packing list: 1 x 433MHZ remote control, 1 x Packing bag

Features
* Suitable for: such as electric retractable door remote control, road gate remote control, alarm remote control, etc.
* Multifunctional, personalized easy-to-use, simple design.
* Wireless transmission distance: 50-150 (m), (open space).
* This remote control can only copy the fixed code, learning code chip, and some single-chip remote control.
* Bidirectional remote control, rolling code remote control, and single-chip encryption program remote control can not be copied.

User Guide
1. Clear the code: use two fingers to press and hold the unlock key and lock key at the same time; LED flashes 3 times in about 2 seconds; release one of the fingers (the other hand does not release), and then use the released finger to quickly press the release key 3 times until the LED flashes; two fingers can be released; and then press any key of the remote control; LED goes out to indicate that the code is successful (all four keys are empty); press any key of the remote control after the lamp is still on to indicate that the original code is not cleared. Still light that the original code is not clear successfully, need to clear the code again, and clear the code successfully to clone, you can repeatedly clear the code and clone.
2. Copy: hold the original remote control with your left hand, hold our cloned remote control with your right hand, and try to get as close as possible to the two remotes; press the first key of the two remotes at the same time; after about 2 seconds, the LED light will flash 2 times; after a second, the light will continue to blink, and then let go of your finger; after successful learning, press the key, and the light will be always on, which means that the first key code of the original remote control has been copied to the other remote control; the same method can be used to open the second key, the third key if copying successfully; if copying successfully, it can be repeated. In the same way, you can turn on the second key and the third key …… If the copy is successful, the function of the remote control is the same as the original matching remote control.
3. Recovery: When you accidentally clear the copy code of the remote control, you can press the bottom two keys of the remote control at the same time to copy, the LED flashes rapidly, press any key and release it, it will be long lighted, which means the code of the remote control has been recovered. Please be sure to check the existing code of the remote control before using our duplicate remote control.